The Mitsubishi 4D34 engine is a 3.9-liter, four-cylinder diesel engine used in Mitsubishi Fuso commercial trucks and industrial equipment. With its conventional mechanical design, it has been used in applications where dependable diesel power and practical servicing are important.
But not every 4D34 engine is the same. Power output, turbocharging, fuel-system components, and external equipment can differ between versions. These differences matter when servicing an existing engine or looking for a suitable replacement.
This guide covers the 4D34 engine specifications, major variants, vehicle applications, common problems, maintenance requirements, and what to check before purchasing a replacement engine.
Mitsubishi 4D34 Engine Overview
The 4D34 belongs to Mitsubishi’s 4D3 diesel engine family. It is a four-stroke, liquid-cooled engine with four cylinders arranged in a straight line.
Its design features direct diesel injection and an overhead-valve (OHV) valvetrain with a gear-driven camshaft. Certain versions use a mechanical inline fuel injection pump, while turbocharging arrangements vary by model.
The 4D34 has been used in Mitsubishi Fuso Canter trucks and industrial machinery. Its conventional construction is familiar to technicians experienced with commercial diesel engines, although specifications vary between applications.

Mitsubishi 4D34 Engine Specifications
The Mitsubishi 4D34 has a displacement of approximately 3.9 liters, with a bore of 104 mm and a stroke of 115 mm.
The table below summarizes its main specifications, including the power and torque ratings of two documented Fuso Canter variants.
Mitsubishi 4D34 Engine Specifications
| Specification | Details |
|---|---|
| Engine family | 4D3 series |
| Configuration | Inline four-cylinder, four-stroke diesel |
| Displacement | 3,907 cc (3.9L) |
| Bore × stroke | 104 × 115 mm |
| Fuel injection | Direct injection |
| Valve mechanism | OHV, gear-driven camshaft |
| Cooling system | Liquid-cooled |
| Turbocharging | Depends on engine variant |
| 4D34-2AT4 power | 100 kW (136 PS) at 2,900 rpm |
| 4D34-2AT4 torque | 370 Nm at 1,600 rpm |
| 4D34-2AT5 power | 81 kW (110 PS) at 2,900 rpm |
| 4D34-2AT5 torque | 275 Nm at 1,600 rpm |
| Main applications | Commercial trucks and industrial equipment |
Power and torque figures are based on specific Mitsubishi Fuso Canter configurations. Ratings may vary by application and market. PS refers to metric horsepower. Always verify specifications against the relevant engine and vehicle documentation.
How Much Horsepower Does a 4D34 Engine Have?
The Mitsubishi 4D34 engine produces different power outputs depending on the version. In documented Fuso Canter configurations, the 4D34-2AT4 produces 136 PS (134 hp), while the 4D34-2AT5 produces 110 PS (108 hp).
Other vehicle and industrial versions may have different ratings, so it’s important to check the exact engine specification rather than relying on a single horsepower figure.
4D34 Engine Variants and Differences
Several 4D34 versions have been developed for different vehicle and industrial applications. Although they share the same basic engine design, their power output, turbocharging, and external equipment can differ.
The 4D34-T and 4D34-TL are industrial engine versions. Both are turbocharged, while the 4D34-TL also features an intercooler that cools compressed intake air.
The 4D34-2AT4 and 4D34-2AT5 appear in Mitsubishi Fuso Canter applications, with different documented power and torque ratings. Other designations, including the 4D34-2A and 4D34-3A, also appear in the engine family and should be checked against their own specifications.
When sourcing a replacement engine, confirm the complete engine code along with the fuel system, turbocharger, engine mounts, and accessories. Two engines carrying the 4D34 designation are not necessarily interchangeable.

What Vehicles Use the Mitsubishi 4D34 Engine?
The Mitsubishi 4D34 is closely associated with the Mitsubishi Fuso Canter, a range of commercial trucks used for deliveries, construction support, goods transportation, and other business operations.
Mitsubishi Fuso documentation identifies 4D34 variants in Canter configurations such as the FE71P and FE85P. However, engine availability varies by production year, market, and vehicle specification.
Not every Fuso Canter uses a 4D34 engine. Mitsubishi Fuso has installed several diesel engine families across different Canter generations, so checking the chassis code and original engine designation is essential.
Industrial Applications
Mitsubishi Fuso has also offered 4D34-series engines for industrial use, including generators and various types of machinery.
These engines may have different operating-speed settings, cooling arrangements, and auxiliary equipment compared with road-vehicle versions.
For example, an engine designed for a generator may operate at a relatively constant speed, while a truck engine must handle changing loads and engine speeds.
As a result, a 4D34 removed from industrial equipment should not automatically be considered a suitable replacement for a truck engine.

Is the Mitsubishi 4D34 Engine Reliable?
The Mitsubishi 4D34 has a relatively straightforward mechanical design, including an OHV valvetrain and gear-driven camshaft. Compared with some modern diesel engines equipped with complex electronic systems, certain versions may also be easier for technicians familiar with mechanical fuel injection to service.
That said, reliability depends on more than engine design.
Maintenance history, operating loads, fuel quality, cooling-system performance, and component wear all affect engine condition. A truck regularly carrying heavy loads, for example, may place greater demands on its engine than one used for lighter deliveries.
There is no single mileage figure that accurately represents the lifespan of every 4D34 engine.
When evaluating a used engine, maintenance records, oil consumption, cooling performance, and inspection results tell you more about its condition than broad claims about how many kilometers it can last.

Common Mitsubishi 4D34 Engine Problems
Like other commercial diesel engines, the Mitsubishi 4D34 can develop operating problems as components age or maintenance is neglected.
The following issues may occur on a 4D34, although they are not necessarily defects specific to this engine family.
1. Engine Overheating
Overheating can result from coolant leaks, a clogged radiator, thermostat problems, or poor coolant circulation.
If the temperature repeatedly rises above normal, the cooling system should be inspected rather than simply topping up the coolant. Continuing to operate an overheating engine can damage the cylinder head, head gasket, and other internal components.
2. Hard Starting
Difficulty starting may result from fuel delivery problems, air entering the fuel system, injection issues, or low cylinder compression.
If the engine cranks slowly, start by checking the battery, starter motor, and electrical connections. If it cranks normally but fails to start, the problem may involve fuel delivery, starting-aid equipment where fitted, or engine compression.
Paying attention to how the engine behaves during starting can help narrow down the cause before parts are replaced.
3. Excessive Smoke or Loss of Power
Abnormal exhaust smoke can point to combustion or mechanical problems.
Black smoke may be associated with restricted airflow or fuel-injection issues. Persistent blue smoke can indicate oil entering the combustion process, while white smoke may have several causes depending on operating conditions.
Loss of power may also result from restricted filters, insufficient turbocharger boost, or fuel-system problems.
Because these symptoms can have different causes, proper diagnosis is important before replacing parts.
4. Oil Leaks and Excessive Oil Consumption
Oil leaks may develop around aging seals, gaskets, and lubrication-system connections.
Excessive oil consumption can also point to internal engine wear or turbocharger-related problems on applicable versions.
Regular oil-level checks are useful, particularly on older engines. Any unusual increase in oil consumption should be investigated before it leads to more serious lubrication problems.

Mitsubishi 4D34 Engine Maintenance Tips
Regular maintenance is important for any commercial diesel engine, especially one operating under heavy loads or in demanding environments.
For the Mitsubishi 4D34, pay particular attention to the following areas:
- Engine oil and filters: Use the correct oil specification and follow the service intervals recommended for the exact engine version.
- Cooling system: Check coolant levels, hoses, radiator condition, and signs of leakage.
- Fuel system: Replace fuel filters as required and investigate fuel contamination or starting difficulties.
- Air intake: Keep air filters clean and inspect intake connections for damage or restrictions.
- Turbocharger: On turbocharged versions, check for unusual noises, boost problems, and signs of oil leakage.
How Much Oil Does a 4D34 Engine Take?
Oil capacity depends on the specific 4D34 version and its lubrication-system configuration. Mitsubishi Fuso’s industrial-engine catalog lists a lubricating-oil capacity of 9 liters for the 4D34-T and 17 liters for the 4D34-TL.
These are industrial-engine specifications, not universal oil-change refill quantities for truck applications. Always consult the appropriate service manual and follow the manufacturer’s oil-level checking procedure.

Mitsubishi 4D33 vs. 4D34: What Is the Difference?
The Mitsubishi 4D33 and 4D34 belong to the same broader diesel engine family, but they differ in displacement and certain mechanical specifications.
The 4D33 has a displacement of 4,214 cc (4.2L), compared with the 4D34’s 3,907 cc (3.9L).
Both are inline four-cylinder diesel engines with a 115 mm stroke. The main dimensional difference is the cylinder bore: 108 mm for the 4D33 and 104 mm for the 4D34.
Their power output and turbocharging arrangements also depend on the individual engine version.
Although the two engines share some design characteristics, this doesn’t mean they can be swapped directly. Engine mounts, transmission connections, fuel systems, and other installation details must be checked before considering a replacement.

Buying a Mitsubishi 4D34 Replacement Engine
When a 4D34 engine requires major repair, replacing the assembly may be an alternative to rebuilding the original unit.
Whether you’re buying for a single truck or sourcing engines for wholesale distribution, getting the correct version matters more than simply finding an engine advertised under the right family name.
Confirm the Correct Engine Model
Before ordering, provide your supplier with the complete engine code, vehicle model, production year, and available identification details.
Photos of the original engine, its identification markings, and external components can also help confirm the required configuration.
The vehicle’s chassis number or VIN may provide useful information, but it shouldn’t be the only reference, especially if the original engine has previously been replaced or modified.
Matching the engine code is an important first step, but it doesn’t always guarantee a compatible replacement. For more guidance, see our replacement engine compatibility guide.
Long Block vs. Complete Engine
Replacement engines are available in different assembly configurations.
A long block engine generally includes the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and valvetrain.
A complete engine assembly may include additional components such as the fuel injection system, manifolds, turbocharger, or other accessories.
However, the exact components included can differ from one supplier to another. Always request a detailed component list before placing an order.
Choosing a Reliable Engine Supplier
Price is important, but it shouldn’t be the only factor when comparing replacement engine suppliers.
Ask about component inspections, assembly procedures, available testing records, warranty terms, and packaging methods.
For importers and distributors, consistent product specifications and clear communication are especially important when purchasing engines in bulk.

FAQ
How many liters is the Mitsubishi 4D34 engine?
The Mitsubishi 4D34 is a 3.9-liter diesel engine with a displacement of 3,907 cc. It has four cylinders, a 104 mm bore, and a 115 mm stroke.
How much horsepower does a 4D34 engine have?
Horsepower varies by engine version. In certain Mitsubishi Fuso Canter configurations, the 4D34-2AT4 produces 136 PS, while the 4D34-2AT5 produces 110 PS. Other versions may have different ratings.
Is the Mitsubishi 4D34 turbocharged?
Several 4D34 versions are turbocharged, including the 4D34-T, 4D34-TL, 4D34-2AT4, and 4D34-2AT5. The 4D34-TL also features an intercooler.
What trucks use the 4D34 engine?
The 4D34 has been used in different Mitsubishi Fuso Canter configurations, including documented FE71P and FE85P applications. Engine availability varies by production year, chassis, and market.
Are all 4D34 engines interchangeable?
No. Differences in fuel injection equipment, turbochargers, engine mounts, transmission connections, and accessories can affect compatibility. Always confirm the complete engine specification before ordering a replacement.

Conclusion
The Mitsubishi 4D34 is a 3.9-liter diesel engine used in Fuso commercial trucks and industrial equipment. While its variants share a common engine design, differences in power output, fuel systems, and external components make accurate identification essential when maintaining or replacing an engine.
About Us
At Woda Auto, we supply replacement engines and major engine components to international distributors, importers, and wholesale buyers. Looking for Mitsubishi Fuso engine solutions? Contact our team with your required engine models and quantities to discuss availability and sourcing options.







